AUSVIGOR

Is the Ausvigor JackEasy tool compatible with any other manufacturers modular connectors?

A: No. Now with the unique JackEasy tool terminating all of Ausvigor’s connectors just got easier with the use of a single proprietary tool that crimps and cuts all excess wires with a single squeeze of the handle. The JackEasy is compatible with both EZ and HD modular connectors.
Will a 4P4C plug fit into a 6P6C jack?
A: Yes. It might be a little loose and will damage the outside 2 pins of the 6P6C jack.

Does Ausvigor have a tool which crimps F-type, RCA, BNC, and keystone module type of connectors on coaxial cables?

A: Yes. ASACSCT01U Universal Compression Tool provides a quick, easy, and reliable method of terminating and compressing connectors on cables.

Can you recommend a field tester for wiring set ups?

A: The most commonly used testers are Fluke, Ideal, Microtest, and Agilent.

Does Ausvigor manufacture a modular plug for solid wire?

A: Ausvigor offers ASMP8P8C6E (CAT 6), ASMP8P8C6S (CAT 6 SHIELDED), ASMP8P8C5E (CAT5E), ASMP8P8SRD (8P8C) and ASMP6P6SRD (6P6C).

What gauge of wire is specified for use with the 6P6C plug?

A: It would be specified for 24-28 AWG Stranded.

What is an RJ-22 jack?

A: RJ-22 jack is a 4P4C type jack that mates with Ausvigor’s ASMP4P4CHS plug. These are most often used on telephone handset cords.

How many Category 5 cables can fit into a 0.75 inch raceway, a 1.25 inch raceway, and a 1.75 inch raceway?

A: Category 5 cables may vary in diameter, depending on the manufacturer. Cables will also vary in diameter depending on whether they are plenum or non-plenum. Therefore, trying to identify a specific number is not the best method of determining raceway capacity. According to TIA/EIA-569-A (Section 4.7.3.2), the practical capacity for telecommunications cabling in perimeter raceways ranges from 20% to 40% fill depending on cable-bending radius. The pathway size shall be calculated as follows: the summation of the cross-sectional area of all cables divided by the percent (expressed as a decimal fraction) of fill.

Does Ausvigor manufacture an RJ-11 plug or jack with 8 conductors?

A: The RJ-11 plug or jack is configured for 6 positions. The RJ-45 plug or jack is configured for 8 positions, 8 conductors modular plug or jack.

What are the benefits of the RoHS Directive?

A: The extraction and disposal of hazardous raw materials can cause damage to both the environment and to human health. The removal and or reduction of these types of materials at the production level will help reduce health risks associated with exposure and especially so for children and the elderly and pregnant women.

Can Ausvigors 8P8C modular plug be used in the CAT 5 CAT 5e or CAT 6 applications?

A: The 8P8C modular plug is compatible with the CAT 5 or CAT 5e connectors found in mechanical structures. The performance depends on the lowest category of cable patch cord and jacks used. CAT 6 patch cords with modular plugs are precision products just.

What are the six banned substances?

A: The six banned substances are Lead (Pb) Cadmium (Cd) Mercury (Hg) Hexavalent Chromium (Cr6+) Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ethers (PBDE).

The punch down tool ASACSPDT00 I’m presently using is too hard to push down, and it doesn’t cut the wires all the way through?

A: Ausvigor has redesigned its punch down tool. The new tool uses 11 kg. for low impact, and 15 kg. for high impact.

Why is it important to use a termination tool?

A: A termination tool must be used to properly seat the wire into the IDC (insulation displacement connector) and insure a good connection. Ausvigor’s ergonomically designed AS110 Punch Down Tool with interchangeable blades and low or high impact settings, was specifically developed to provide quick and efficient connection every time.

Does Ausvigor carry a raceway cutting tool?

A: Yes. ASACSTPE60 Raceway Cutting Tool cuts all Ausvigor’s raceway sections.

Will Ausvigor compression connectors work on Mini-Coax cable? Or plenum type coax cable?

A: No, the Ausvigor compression connectors were designed to work on standard non-plenum RG-6 or RG-59 cables only.

What is affected by RoHS?